Inside the header box should be two marquee units and the parts
box. The parts box contains all the hardware needed to assemble
the game.
Check Box When This Step is Complete
Step # 4-B
Removing the acrylic header marquee(s)
While removing the header pieces from inside the header cabinet,
note that some pieces of acrylic may be located under the lip of the
cabinet. DO NOT pull the cabinet apart to remove this, gently rotate
the marquee so that it will come out.
Check Box When This Step is Complete
INSTALLATION INSTRUCTIONS
Step # 4
Unboxing the marquee header
Locate the marquee header box and use a razor blade or utility knife
to open the top. Do not allow the blade to go too deep as it could
cause damage to the acrylic header.
NOTICE
DO NOT PENETRATE THE BOX TOO DEEP WITH A
RAZOR BLADE AS IT COULD DAMAGE ACRYLIC
Check Box When This Step is Complete
Step # 4-A
Reviewing the components inside the header box
Jennison Entertainment Technologies
Snow Down Service Manual
Page 17
