Learning to Use JENFAB Belt Washers
41
Temperature
controls
Check for accuracy
Every six months
Warning—
Some inspection, cleaning, and maintenance operations
expose operators to risks (release of compressed air, release of hot
process solution in pressurized lines, electrical energy, pinching from
unexpected startup). These risks can cause bodily harm and death. To
prevent bodily harm and death, follow your plant’s safety operating
procedures and your plant’s lockout/tagout procedures for electric,
compressed air, steam and gas if applicable, and water supplies when
performing inspection, cleaning, and maintenance that exposes operators
to these risks.
Expert Advice—
Components used on the belt washer are rated for
wash down to simply cleaning.
Cleaning the Chip Baskets
Periodically check and empty chips from the wash or rinse chip
baskets by following these steps (Figure 13):
1.
Shut of the machine by pressing the front panel
Emergency Stop
button.
2.
Remove the cover from the tank (wash or rinse).
3.
Remove chip basket from the tank by lifting the baskets out.
4.
Dispose of the chips and clean the basket.
5.
Reinstall the baskets in the tank.
6.
Replace the tank cover.
7.
Reenergize the machine.
