GETTING STARTED
6
LOADING THE BATTERIES
The camera uses 3x AAA alkaline or rechargeable batteries.
1. Slide the Battery Door and lift it open.
2. Insert the batteries according to the polarity indication engraved on
the battery contact.
3. Close the battery compartment cover.
Checking the Battery Level
The battery level indicates the power of the batteries.
Full
Low
Empty
Note:
When batteries are low, the camera will ask you to input
battery type information. This is because the camera needs
to adjust its working voltage to meet the battery supply as
rechargeable batteries are usually 1.2V while alkaline batteries are
1.5V. Choose the correct battery type by pressing the
or
button first, and then pressing the Menu button.
INSERTING AN SD CARD
The camera uses a Secure Digital (SD) memory card to store images and or video clips. Before
proceeding to shoot picture with the camera, you need to buy one SD card.
To insert an SD card:
Insert the memory card in the direction as shown in figure, then gently but firmly push the SD card into
the SD card slot as far as possible. When the card is fully engaged, a click can be heard.
Note:
NEVER forcefully push the card into the camera
to avoid damaging both the card and/or the camera.
To remove the SD card:
Press the memory card into the slot then release. When the card is
partially ejected, pull it out.
Note :
If the format of SD card is FAT32 or NTFS, the camera will format this SD card without
any warning and will change the format to FAT16 file format. Existing files or pictures on the card
will be deleted.
1. Alkaline
2. Rechargeable
