JENCO 6311, Operation Manual

Page: 21 / 36

21
new ON time. You can only turn-ON the WASH relay if the unit is
UNLOCKED.
vi. ID (RS485 ADDRESS) SETTING
This screen selects the unique
ID/address for the unit. Your RS485
communication program must also
use this same ID/ address to
communicate with this unit. The user
can use [
¿
], [
À
] , [ X ]or [ OK ] keys to
input the new ID/address.
vii. PASSWORD SETTING
This screen selects the password
number for this unit. The user can
use [
¿
], [
À
] or [ X ] keys to input the
new password. Pressing the [ OK ]
key will save the password number
and LOCKS the unit. You will not be
able change any setting or turn-on
the wash relay unless a correct 4-digit number is selected in the
PASSWORD CHECK screen.
CAUTION: The user is responsible in remembering their password
number otherwise you would not be able to calibrate or change the
settings.
3. ACTIVE “REL”
If the user selected “ pH ”, please the previous section 1.
ACTIVE “pH” (at page 13). If the user selected “ ABS ”, please see
the previous section 2. ACTIVE “ABS” (at page 19) .
i.
TEMPERATURE PROBE SELECT screen