13
CAUTION:
If the unit is
UNLOCKED
then every time the user
enters the
Calibration/Setting mode
the relays and analog out will
be
FROZEN
(control relays and current output will not be updated
even if the input is changing).
b.
CALIBRATION/ SETTING SELECT
screen
This screen will let the user select only one (pH, ABS. mV or REL.
mV) mode that will control the relay1 - relay4 and mA output.
This
screen will always default to the last CALIBRATION/ SETTING
SELECT you chose, so for most application you don’t need to
change this selection once you decide what reading to use. If you
need to change the CALIBRATION/ SETTING SELECT, press the
[
X
]
RIGHT
key to choose your active reading then press [OK] to
save your new selection and the unit will display the Temperature
probe select screen. If the unit is LOCKED the user will not be able
to change the setting here.
1.
ACTIVE
“pH”
If the user selected “AbS” or “rEL” please see the next section “2.
ACTIVE “
ABS
”” (At page 19) or “ 3. ACTIVE “
REL
”” (At page 21)
respectively.
i.
TEMPERATURE PROBE SELECT screen
Summary of Contents for 6311
Page 34: ...34 B ABSOLUTE mV...
Page 35: ...35...
