JENCO 6311, Operation Manual

Page: 8 / 36

8
in RELAY1 – RELAY4 settings.
8. mA annunciator – this annunciator will turn ON if the user is in
4mA or 20mA setting.
9. ID annunciator – this annunciator will turn ON if the user is in
ID (RS485 address) setting.
10. LOCK annunciator – this annunciator will turn ON if the unit
PASSWORD LOCKED.
11. pH, mV, RmV annunciators – this annunciators will indicate the
unit of MAJOR LCD DISPLAY .
12. LCD MINOR DISPLAY
In MAIN mode, the temperature will be displayed here with the
centigrade unit (
℃)
.
In CALibration mode at Relay1-Relay4 settings, the hysteresis
value will be displayed here without any unit.
13. HI?/LO? annunciators – HI? or LO? indicates relay action
and relay number. (“?“ mark is the relay number.)
14. ON5 annunciator – this annunciator will turn ON if the user
turns ON the WASH relay.