6
2. The [
CAL / VIEW
] key.
2a. In the normal mode, the display will go to
Calibration/Setting
mode if you press this key for about two
seconds.
2b. During
Calibration/Setting
mode, pressing this key will
switch to the next available
Calibration/Setting
page.
Pressing this key at the last
Calibration/Setting
page will
return the user to the normal mode.
3. The [
]
UP
key.
During
Calibration/Setting
mode, pressing this key will
increment
the current blinking digit of the active parameter.
4. The [
]
DOWN
key.
During
Calibration/Setting
mode, pressing this key will
decrement
the blinking digit of the active parameter.
5. The [
]
ENTER
key.
During
Calibration/Setting
mode, pressing this key will save
the current modified parameter and move to the next
parameter on the page. If the parameter is the last one in the
page then it will move to first parameter on the next available
page.
6. The [ ]
LIGHT
key.
This key will turn on or turn off the backlight of the LCD.
The backlight will automatically turn off if there is no key
activity for about two minutes.