JENCO 6308TuSS, Operation Manual, Page: 2 / 26

2
CONTENTS Page
I. INITIAL INSPECTION and ASSEMBLY.............................................. 3
MOUNTING PROCEDURE....................................................... 3
II. GENERAL INTRODUCTION............................................................... 4
III. USING THE JENCO MODEL 6308TuSS........................................... 5
A.
FRONT PANEL (Key function illustration)...................... 5
B.
NORMAL MODE DISPLAY................................................ 7
C.
REAR CONNECTORS....................................................... 8
D. TURNING ON/OFF THE INSTRUMENT............................ 9
IV. MODEL 6308TuSS MODES.............................................................. 10
A.
MAIN DISPLAY MODE....................................................... 10
B.
CALIBRATION/SETTING MODE....................................... 10
How to use the keys.......................................................... 11
a. PASSWORD CHECK page ....................................... 12
b.
USER SETTING
page
............................................... 13
c. CALIBRATION page ................................................. 13
d.
CONTROL SETTING
page
....................................... 17
e. CURRENT OUT SETTING page ............................... 18
f.
WASH SETTING
page
............................................... 18
g. RS-485 SETTING page ............................................. 19
V. CONTROLLING THE RELAYS.......................................................... 20
A.ISOLATION VOLTAGE......................................................... 20
B.OUTPUT LOAD..................................................................... 20
C.RELAY ACTION, RELAY SETPOINT,
& HYSTERESIS VALUE........................................................ 20
D. TURBIDITY AND SUSPENDED SOLIDS RELAYS............. 21
VI. 4-20 mA ANALOG OUTPUT............................................................. 22
A. ISOLATION VOLTAGE........................................................ 22
B. OUTPUT LOAD.................................................................... 22
C. TURBIDITY AND SUSPENDED SOLIDS
LINEAR OUTPUT................................................................ 22
VII. SPECIFICATIONS............................................................................ 24
VIII. WARRANTY.................................................................................... 25