19
999.9 hours).
When the external cleaning is turned on, it will
display "
C
" on the screen. After finishing the equipment wash relay
setup, the user enters to the “RS485 SETTING”page.
g.
RS-485 SETTING
page
RS485 with MODBUS communication protocol.
1. RS485
PARITY:-
the
communication is in the
format of EVEN, ODD and
NONE.
2. RS485 ID:- this is the
unique ID/Address for the
unit. If you are connecting
multiple model 6308TuSS or
other Jenco models for
logging purposes then this ID/Address must be unique for each
connected unit. This ID/Address is the same address that must be
used by the PC program to communicate with this unit.
It is recommended to
use a standard shield twisted pair
cable for optimum RS-485 communications.
3. PASSWORD SET - this is your security code if the unit is locked
the value here will not be available. You need to input the correct
code in the PASSWORD CHECK page.
CAUTION:
You are
is responsible in remembering your
password number otherwise you would no be able to calibrate
or change the settings.