4
Read and understand all operating instructions before operating your kiln.
SAFETY PRECAUTIONS: Kilns are as safe as any other electrical appliance when used under
normal and proper operating conditions. All safety precautions throughout this manual should
be observed.
o
Use common sense while installing and using this kiln.
o
Do not install kiln closer than 12" from any surface, or closer than 18” from a combustible
surface. Remove all potentially combustible materials from the kiln area
o
Make sure all electrical specifications are followed. Use correct voltage, wire size and
circuit breaker. Make sure all connections are tight. Avoid using aluminum wire. Always
use the proper grounded receptacle. A qualified electrician or service person should be
used for all electrical service or repairs.
o
Install in covered, walled in, well-ventilated area. Do not allow your kiln to get wet.
Fumes from the ware should be vented to the outside. Never use your kiln outside!
Avoid moisture.
o
Always keep children and unsupervised personnel away. Surface will get hot and a burn
could result.
o
Fire glass only to the manufacturers recommended firing temperature. Improper fire
temperatures could result in damage to your kiln. Do not operate glass kilns over the
maximum temperature rating of 1700
o
F for top and side firing glass kilns
o
Chilipepper kilns are for annealing glass only with a max temperature of 1100
o
F
o
Replace any worn or defective parts with ONLY genuine Jen-Ken Kiln replacement
parts.
o
Unplug kiln when not in use and if there is an electrical storm.
o
Unplug the kiln before servicing or vacuuming.
o
Do not drop or slam the lid shut.
o
Let the kiln cool to room temperature before opening the lid.
o
NOTE: If you are in doubt about anything, call Jen-Ken Kilns during regular business
hours M-F 8-4 Eastern at 863-648-0585 or send an email to [email protected].
ABOUT YOUR KILN
