JEI SteelBeast BM-12, Safety Instructions And Operator'S Manual

Page: 9 / 16

BM-12 Bevelling Machine
- 8 -
Arrange the indexable carbide insetrs in staggered, in order to achieve better
bevelling result.
1. Using the supplied L-type torx wrench, loosen fixing screw and remove the
carbide insert
2. Index the carbide insert to the next sharp edge or insert a new one as needed.
3. Retighten carbide insert with its torx fixing screw.
REMOVING THE TOOL HOLDER –
DISCONNECT TOOL FROM POWER SOURCE
WARNING: Danger of Burns! Tool holder and carbide inserts become hot in
operation.
Wear gloves and take precautions to prevent burns when working with this part
of the machine.
If it is necessary to change from the standard 45 deg. Tool holder to an optional
30 deg. Tool holder, the entire tool holder must be changed.
1. Loosen the 2 lock knobs and fully unscrew and remove the support deck
assembly.
2. Using the supplied thin-section openend wrench, secure the spindle.
3. Using the supplied hook spanner wrench, engage one of the holes in the tool
holder and loosen the tool holder from the spindle.
4. Assembly is the opposite of disassembly.
5. Replace and adjust the support deck assembly.
Tool holder
L-type torx wrench
Carbide insert
Tool holder
Open-end
wrench
Hook spanner wrench