BM-12 Bevelling Machine
- 5 -
standard 45 degree tool holder for use with triangle indexable carbide cutter
inserts to achieve quick and easy bevelling.
WARNING: The machine should not be converted or modified, e.g. for any other
form of use, other than as specified in these operating instructions. The user
shall be liable for damages and accidents due to incorrect use.
ELECTRICAL CONNECTION
The network voltage must confirm to the voltage indicated on the tool name
plate. Under no circumstances should the tool be used when the power supply
cable is damaged. A damaged cable must be replaced immediately by an
authorised customer service centre. Do not try to repair the damaged cable
yourself. The use of damaged power cables can lead to an electric shock.
EXTENSION CABLE
If an extension cable is required, it must have a sufficient cross-section so as to
prevent an excessive drop in voltage or overheating. An excessive drop in voltage
or overheating. An excessive drop in voltage reduces the output and can lead to
failure of the motor. The following table shows you the correct cable diameter as
a function of the cable length for this machine. Use only U.L. and CSA listed
extension cables. Never use two extension cables together. Instead, use one long
cable.
Total Extension
Cord Length (feet)
Cord Size (AWG)
25
16
50
12
100
10
150
8
200
6
Summary of Contents for SteelBeast BM-12
Page 13: ...BM 12 Bevelling Machine 12 ...
Page 14: ...BM 12 Bevelling Machine 13 ...
Page 15: ...BM 12 Bevelling Machine 14 ...
