WWW.JEIUK.COM
RAILBEAST RDP-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
7
2. SAFETY PRECAUTIONS
1. Before starting, read the included manuals and complete proper occupational
safety and health training.
2. Use the
machine
only in applications specified in this Operator’s Manual.
3. The
machine
must
be
complete
and
all parts must be genuine and fully functional.
4. Transport and position the machine by using the carrying handle.
5. The machine must always be placed in vertical position.
6. Untrained bystanders must not be present near the machine.
7. Install the tools securely by tightening the set screws. Remove wrenches from the
work area before starting.
8. Never use tools that are dull or damaged.
9. Never use annular cutters without a pilot pin.
10. Install and remove tools by using protective gloves and only when the engine
switch is set to OFF.
11. Before starting, make sure that the rail profile templates installed are consistent
with the rail standard.
12. Do not make holes which diameter or depth differ from those specified in the
technical data.
13. Never use near flammable liquids or gases, or in explosive environments.
14. Before every use, inspect the machine to ensure it is not damaged. Check
whether any part is cracked or improperly fitted. Make sure to maintain proper
conditions that may affect the operation of the machine.
15. Use the cutting fluid consistent with the ambient temperature.
16. Always use eye and hearing protection and protective clothing during work.
Do not wear loose clothing.
17. Before starting the engine, set the feed lever as far to the front as possible.
18. Do not touch chips or moving parts. Prevent anything from being caught in
moving parts.
19. After
every
use,
remove chips
and excess coolant from the machine and tool.
Do not remove chips with bare hands.
20. Cover steel parts with a thin anti-corrosion coating to protect the machine from
rust when not in use for any extended period.
