WWW.JEIUK.COM
RAILBEAST RDP-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The RAILBEAST RDP-36 is a drilling machine designed to drill holes in rails of UIC54,
UIC60, P50, P65, S49, or any other standard. The machine can drill holes with
diameters of up
to
36
mm
(1-7/16
’’)
by
using annular cutters or with diameters of up to
16 mm (
5/8’’) by using twist drill bits. Thanks to the use of a petrol engine, the
machine does not require electrical supply.
Ordered separately rail profile templates allow the machine to be clamped onto a
rail, and hole center positioners allow you to obtain the proper span between holes.
1.2. Technical data
Engine
Honda GXH50
Displacement
49.4 cm
3
(3.01 cu in)
Power
1500 W
Tool holder
19 mm
(3/4’’) Weldon
Maximum drilling diameter with annular cutter
36 mm (1-
7/16’’)
Maximum drilling diameter with twist drill bit
16 mm (5/
8’’)
Maximum drilling depth
30 mm (1-
3/16’’)
Stroke
39 mm (1-
9/16’’)
Rotational speed without load
120
–280 rpm
Rotational speed with load
225 rpm
Required ambient temperature
From
–5°C to 40°C (23–104°F)
Weight
18.7 kg (41 lbs)
