9
Foam Installation for hair trigger
(optional feature)
- In the package are 2 types of foams (2pcs each), black has width 2mm, white width 1mm.
- Foam is placed on the trigger, which interrupts the optical sensor beam with shorter pull.
7. AK only:
hold spring from the
bottom and bend it with pliers.
8. G36 only:
push spring to the
bottom edge of the gearbox.
WARNING:
Very short trigger pull can cause random shots or constantly pulled trigger!
1.
Take out one of two foams by pliers.
Do not touch the foam by hand!
2.
Clean back part of the trigger by degreaser.
3.
Place one or two foams on it by the photo.
4.
Assemble the gearbox with trigger and test
trigger response in the app „sensor check“
