background image

11

There are many ways to look after and protect your Jeep

®

 stroller. The

most important is to clean up any spills or food, before it dries on the

fabric.

As the covers are not designed to be easily taken off for washing, (for

safety reasons) the easiest method to clean is, sponge the surfaces

with a mild solution of warm water liquid laundry detergent. Rinse well

with clean sponge and leave to dry out of direct sun.

Sand and Salt water should be rinsed with a hose and wiped dry to

prolong the life of the wheels, axles and other moving parts.

Never use petroleum based lubricants on your stroller, the most

suitable lubricants are silicone based products.

Jeep

®

 is a registered trademark of Daimler Chrysler Corporation, and is

used under license by Born With Style. ©Chrysler LLC 2007.

Born With Style warrants this product to be free of defects in materials

and workmanship as follows: For a period of ONE YEAR from the

date of purchase, Born With Style will repair or replace, at its option,

the defective product. This warranty is given in addition to (and not in 

substitute for) applicable statutory rights which you may have.

We sincerely thank you for purchasing this Born With Style product.

For further information visit: www.bornwithstyle.com.au

Warranty

Care & Maintenance

Summary of Contents for Urban Rider













Reviews: