Jeep Compass 2023, Owner'S Manual

Page: 152 / 304

150 MULTIMEDIA
Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking
Submenu
This setting will change the distance at which the Forward Collision Warning alert sounds.
The “Medium” setting will have the FCW system signal when an object is in view, and the
possibility of a collision is detected. The “Near” setting will have the FCW system signal
when the object is closer to the vehicle. The “Far” setting will have the FCW system signal
when an object is at a far distance from the vehicle.
Pedestrian Emergency Braking — Located In Automatic Emergency Braking Submenu This setting will turn the Pedestrian Emergency Braking system on or off.
Lane Management — Located In Active Lane Management
This setting will activate the system that will alert the driver when a lane departure is
detected. If selected, steering assist can be provided. The available options are
“Vibration Only”, “Steering Assist Only”, and “Vib Steering Assist”.
Lane Warning — Located In Active Lane Management
This setting will set the warning type for Active Lane Management. The available options
are “Early”, “Medium”, and “Late”.
Vibration Strength — Located In Active Lane Management
This setting will set the strength of the steering wheel vibration. The available options are
“Low”, “Medium”, and “High”.
Steering Assist Strength — Located In Active Lane Management
This setting will set the strength of the steering wheel pull when a lane departure is
detected. The available options are “Low”, “Medium”, and “High”.
LaneSense Warning — Located In LaneSense submenu
This setting will set the warning type for LaneSense. The available options are “Early”,
“Medium”, and “Late”.
LaneSense Strength — Located In LaneSense submenu
This setting will set the strength of the LaneSense system. The available options are
“Low”, “Medium”, and “High”.
ParkSense
This setting will change the type of ParkSense alert when a close object is detected.
The “Sound Only” setting will provide an audible chime when an object is detected.
The “Sound and Display” setting will provide both an audible chime and a visual display
when an object is detected.
Front ParkSense Volume
This setting adjusts the volume of the Front ParkSense system. The available settings are
“Low”, “Medium”, and “High”.
Rear ParkSense Volume
This setting adjusts the volume of the Rear ParkSense system. The available settings are
“Low”, “Medium”, and “High”.
Setting Name Description
23_MP_OM_EN_USC_t.book Page 150