Jeep Compass 2023 Owner'S Manual Download Page 256

Page: 256 / 304

254

SERVICING AND MAINTENANCE

Rear Cargo Fuse/Relay Distribution Unit -If

Equipped

To access the fuses, remove the storage bin from the left

rear panel of the rear cargo area.

Rear Fuse Box Location

The fuses may be contained in two units. Fuse Holder No.

1 is located closest to the rear of the vehicle and Fuse

Holder No. 2 (If equipped with trailer towing) is located

closest to the front of the vehicle.

NOTE:

The fuse may be contained in an In-line Fuse holder

(If equipped with a Sunroof or Power Inverter Module).

23_MP_OM_EN_USC_t.book Page 254

Summary of Contents for Compass 2023

















































































































































































































































































































Search results

Summary of Contents for Compass 2023

Reviews:

Related manuals for Compass 2023

Brands by name

Popular brands

Jeep Compass 2023, Owner'S Manual

Search results

Summary of Contents for Compass 2023

Reviews:

Related manuals for Compass 2023

Brands by name

Popular brands