Jeep Cherokee 2019, Owner'S Manual, Page: 57 / 636

NOTE:
If a memory profile has not already been set, refer
to ⬙ Programming The Memory Feature ⬙ in this section for
instructions on how to set a memory profile.
3. Push and release the set (S) button on the memory
switch, then within five seconds push and release the
button labeled (1) or (2) accordingly. “Memory Profile
Set” (1 or 2) will display in the instrument cluster
display.
4. Push and release the lock button on the key fob within
10 seconds.
NOTE:
Your key fob can be unlinked to your memory
settings by pushing the set (S) button, followed by pushing
the unlock button on the key fob within 10 seconds.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not in
PARK, a message will display in the instrument cluster
display.
• To recall the memory settings for driver one, push
memory button number (1) or the unlock button on the
key fob linked to memory position 1.
• To recall the memory settings for driver two, push
memory button number (2) or the unlock button on the
key fob linked to memory position 2.
A recall can be canceled by pushing any of the memory
buttons (S, 1, or 2) during a recall. When a recall is
canceled, the driver seat will stop moving. A delay of one
second will occur before another recall can be selected.
Easy Entry/Exit Seat — If Equipped
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
The distance the driver seat moves depends on where you
have the driver seat positioned when you cycle the vehi-
cle’s ignition to the OFF position.
•
When you cycle the vehicle’s ignition to the OFF posi-
tion, the driver seat will move about 2.4 inches (60 mm)
rearward if the driver seat position is greater than or
equal to 2.7 inches (67.7 mm) forward of the rear stop.
The seat will return to its previously set position when
you cycle the vehicle’s ignition to the ACC or RUN
position.
•
The Easy Entry/Easy Exit feature is disabled when the
driver seat position is less than 0.9 of an inch (22.7 mm)
3
GETTING TO KNOW YOUR VEHICLE 55