
The ParkSense switch LED will be on when ParkSense is
disabled or requires service. The ParkSense switch LED
will be off when the system is enabled. If the ParkSense
switch is pushed, and the system requires service, the
ParkSense switch LED will blink momentarily, and then
the LED will be on.
Operation With A Trailer
The operation of the sensors is automatically deactivated
when the trailer’s electric plug is inserted in the vehicle’s
tow hook socket. The sensors are automatically reactivated
when the trailer’s cable plug is removed.
Service The ParkSense Park Assist System
During vehicle start up, when the ParkSense System has
detected a faulted condition, the instrument cluster will
actuate a single chime, once per ignition cycle, and it will
display the
⬙
PARKSENSE UNAVAILABLE WIPE REAR
SENSORS
⬙
,
⬙
PARKSENSE UNAVAILABLE WIPE FRONT
SENSORS
⬙
, or the
⬙
PARKSENSE UNAVAILABLE SERVICE
REQUIRED
⬙
message for five seconds. When the gear
selector is moved to REVERSE and the system has detected
a faulted condition, the instrument cluster display will
display a
⬙
PARKSENSE UNAVAILABLE WIPE REAR SEN-
SORS
⬙
,
⬙
PARKSENSE UNAVAILABLE WIPE FRONT SEN-
SORS
⬙
or
⬙
PARKSENSE UNAVAILABLE SERVICE RE-
QUIRED
⬙
pop up message for five seconds. After five
seconds, a vehicle graphic will be displayed with
⬙
UN-
AVAILABLE
⬙
at either the front or rear sensor location
depending on where the fault is detected. The system will
continue to provide arc alerts for the side that is function-
ing properly. These arc alerts will interrupt the
⬙
PARKSENSE UNAVAILABLE WIPE REAR SENSORS
⬙
,
⬙
PARKSENSE UNAVAILABLE WIPE FRONT SENSORS
⬙
,
or
⬙
PARKSENSE UNAVAILABLE SERVICE REQUIRED
⬙
messages if an object is detected within the five second
pop-up duration. The vehicle graphic will remain dis-
played for as long as the vehicle is in REVERSE.
Refer to “Instrument Cluster Display” in “Getting To Know
Your Instrument Panel” for further information.
If
⬙
PARKSENSE UNAVAILABLE WIPE REAR SENSORS
⬙
or
⬙
PARKSENSE UNAVAILABLE WIPE FRONT SENSORS
⬙
ap-
pears in the instrument cluster display make sure the outer
surface and the underside of the rear fascia/bumper and/or
front fascia/bumper is clean and clear of snow, ice, mud, dirt
or other obstruction and then cycle the ignition. If the
message continues to appear see your authorized dealer.
6
STARTING AND OPERATING
329
Summary of Contents for Cherokee 2019
