MSAM, 40/100G Transport Module, DMC, and 5800 Getting Started Manual
ii
2204561, Rev. 000
January 2014
Notice
Every effort was made to ensure that the information in this document was accurate at the time of
printing. However, information is subject to change without notice, and JDS Uniphase reserves the
right to provide an addendum to this document with information not available at the time that this
document was created.
Copyright
© Copyright 2014 JDS Uniphase Corporation. All rights reserved. JDSU, Network and Service
Enablement, and the JDSU logo are trademarks of JDS Uniphase Corporation (“JDS Uniphase”).
All other trademarks and registered trademarks are the property of their respective owners. No part
of this manual may be reproduced or transmitted electronically or otherwise without written permis-
sion of the publisher.
Copyright release
Reproduction and distribution of this guide is authorized for Government purposes only.
Trademarks
JDSU Uniphase, JDSU, MTS 8000, T-BERD 8000, MTS 6000A, T-BERD 6000A, MTS 5800 and
T-BERD 5800 are trademarks or registered trademarks of JDS Uniphase in the United States and/
or other countries.
Bluetooth is a registered trademark of The Bluetooth SIG, Inc. in the United States and/or other
countries.
Specifications, terms, and conditions are subject to change without notice. All trademarks and
registered trademarks are the property of their respective companies.
Ordering information
The catalog number for a printed getting started manual is ML-22046563. The catalog number for
electronic manuals on USB is EML-22046537.
Terms and conditions
Specifications, terms, and conditions are subject to change without notice. The provision of hard-
ware, services, and/or software are subject to JDSU’s standard terms and conditions, available at
.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which
case, the user will be required to correct the interference at this own expense. However, there is no
guarantee that interference will not occur in a particular installation.
