JDS Uniphase SmartClass E1, Reference Manual

Page: 31 / 88

Chapter 3 Action commands
Querying the attributes of an action
SmartClass E1 Tester Remote Control Reference Guide 17
Querying the attributes of an action
This command queries the attributes of the action. Actions only have applica-
bility.
Command
rc a_get_attr action_name
Response
2:SCE:cmsend:ack:a_get_attr applicability executable
applicability
is a Boolean value and will be 0 or 1.
executable
is a Boolean value and will be 0 or 1.
Querying the state and attributes of an action
This command queries the state and attributes of the action. Actions only have
applicability.
Command
rc a_get_all action_name
Response
2:SCE:cmsend:ack:a_get_all applicability executable
current_state next_state
applicability
is a Boolean value and will be 0 or 1.
executable
is a Boolean value and will be 0 or 1.
current_state
is a string representation of the action's current state.
next_state
is a string representation of the action's next state.
Querying the states and attributes of multiple actions
This command queries multiple actions for the state and attributes of each
action. Actions only have applicability.
Command
rc a_mget_all action1_name action2_name …
Response
2:SCE:cmsend:ack:a_mget_all action1_name, applicability,
executable, current_state, next_state, action2_name,
applicability, executable, current_state, next_state, …
applicability
is a Boolean value and will be 0 or 1.
executable
is a Boolean value and will be 0 or 1.