JDS Uniphase SmartClass E1, Reference Manual

Page: 27 / 88

Chapter 2 Setup commands
Saving setups to a file
SmartClass E1 Tester Remote Control Reference Guide 13
Saving setups to a file
This command requests that the setups are saved to the specified file. The
specified description will be placed at the beginning of the file. If no file name
is specified, the file name “<application name>.cfg>” is used. The description
is optional.
The file name should not include any spaces.
Command
rc s_file_save [-f] filename description
Response
2:SCE:cmsend:ack:: s_file_save
If the file is already exist, you may use “-f” parameter to overwrite it.
Restoring setups from a file
This command requests that the setups are restored from the specified file. If
no file name is specified, the file name “<application name>.cfg” is used.
Command
rc s_file_restore filename
Response
2:SCE:cmsend:ack::s_file_restore
List saved setup files
This command requests a list of saved setup files for the current application.
Command
rc s_file_list
Response
2:SCE:cmsend:ack::s_file_list "E1bert.cfg",
"mysetups.cfg", "yoursetups.cfg"
Deleting a saved setup file
This command requests that the specified saved setup file be deleted. If no file
name is specified, the file name “<application name>.cfg” is used.
Command
rc s_file_delete "mysetups.cfg"
Response
2:SCE:cmsend:ack::s_file_delete