JDS Uniphase SmartClass E1, Reference Manual

Page: 12 / 88

About this Guide
Purpose and scope
ii SmartClass E1 Tester Remote Control Reference Guide
Purpose and scope
The purpose of this guide is to describe how to connect to a SmartClass E1
Tester and control it remotely, over the serial interface, using the SCPI (Stan-
dard Commands for Programmable Instruments) command set.
The SCPI command set enables programmers to develop control programs for
a variety of remote control applications, for example, running a BERT for a
specified time period.
Assumptions
This guide is intended for experienced users who want to use the SmartClass
E1Tester effectively and efficiently. We are assuming that you have basic
computer experience and are familiar with basic telecommunication concepts,
terminology, and safety.
Safety and compliance information
Safety and compliance information are contained in a separate guide and are
provided in printed format with the product.
Conventions
This symbols and safety terms used in this guide are described in the following
tables.
Table 1 Symbol conventions
This symbol represents a general hazard.
This symbol represents a risk of electrical shock.
This symbol represents a risk of explosion
This symbol represents a Note indicating related information or
tip.
This symbol, located on the equipment or its packaging indi-
cates that the equipment must not be disposed of in a land-fill
site or as municipal waste, and should be disposed of accord-
ing to your national regulations.