Mute
- This button is located on the opposite
side of the Talk-Bell-Monitor switch. Press
and hold to shut the unit's transmitter off.
This feature may also be used to improve
communications in noisy locations where it is
difficult for the user to hear a person on the
other end of the line.
Flash
- When pressed, causes a 0.6 second
interruption of the loop current (hook flash).
Usually used for register recall, to put a call
on hold, to activate a second line, or where
some special function needs to be activated.
*/T When pressed in pulse mode, switches
from
pulse
to
tone
dialing mode.
Store
- Press Store, enter the number you
wish to store, press Store and the location on
the numeric keypad (0-9) where you wish to
store the number. Ten 7 digit numbers can
be stored.
Last/P
- When pressed first, the last number
dialed will be redialed from the unit’s internal
memory. When pressed after another digit,
a pause of approximately .6 seconds is
inserted in the dialing sequence for
pbx
or
Centrex switch dialing or other systems that
require an intermediate access digit in order
to access a line.
