Select the Talk mode and confirm that
dial tone is present.
Proceed with dialing, line testing, etc.
Mixed-Mode Dialing
In certain situations, it may be necessary
to set up a call using both Pulse and Tone
dialing. In this situation, a number can be
entered in the Pulse mode then by pressing
the */T button, the unit will switch to Tone
mode so that tones can be sent to devices
such as answering machines, etc. that are
activated by specific tone codes.
Last Number Redial
The last number dialed can automatically be
redialed in either the Tone or Pulse modes.
To redial the last number, switch from Talk to
Monitor then back to Talk mode. Once you
have confirmed a dial tone press the Last/P
button on the keypad.
Ringer
Select the Bell mode.
Connect the
red
cord set lead to Ring (-
) and
black
cord set lead to Tip (+).
The unit will now "ring" when ringing
voltage is detected on the line.
.
6.
.
.
.
