13
CleanBlast – PortaBle
InsPeCt:
PATCH CORD
INSPECT
3.
Install the correct
patch cord tip
to the probe microscope.
Note: Standard tips
require barrel assembly
(see page 8 for tip installation guide and
Appendix A: Inspection Tips Reference Guide on
page 26).
4.
Attach the patch cord to the probe to
inspect.
5.
Turn the
focus control
on the probe to focus
the fiber image on the display.
6.
Determine whether
clean
or
dirty
.
If clean,
do not touch it and
CONNECT
.
If dirty,
and if cleaning is required,
CLEAN.
Inspection Tip
Barrel Assembly
Focus Control
1.
Connect and thread the 4-pin probe to the
probe input.
2.
Turn the system ON.
4
5
6
3
1
2
SET-uP
TIP INSTALLATION
INSPECT PATCh CORD
