10
User ManUal
6.4-InCh tft lCD
Note:
If the optional 6.4-in LCD is purchased with the
CleanBlast system, the display will be pre-installed and
will require no installation. If you would like to purchase
the LCD, please refer to the
Parts
section (page 25) of
this manual to order this part. Installation instructions
for the LCD will accompany the display when ordered
separately.
Power Button
Press this button to power ON and OFF.
To power OFF, press and hold for 1 to 2 seconds.
mode Button
Press this button to switch and select
Brightness, Contrast, Color, Tint,
and
reset
modes.
up/Down Selector
Press the
Mode Button
to select mode, then
press this button to adjust level of image
quality, e.g., brighter or darker screen, high or
low contrast.
Power Cable
The terminal for power and video signal
between the LCD and probe microscope. The
S-video input is located on the CleanBlast
panel.
6.4-INCh DISPLAY
Dimensions
17.3 x 13.5 x 2.8 cm (6.8 x 5.3 x 1.1 in)
Display method
Active matrix TFT - LCD
Display size
6.4-in diagonal
Color system
NTSC/PAL (auto switchable)
resolution
960 x 234
operating temp
–10
°
C (14
°
F) ~ +60
°
C (140
°
F)
storage temp
–20
°
C (–4
°
F) ~ +70
°
C (158
°
F)
6.4-INCh LCD SPECIFICATIONS
