© 2016 JCM American Corporation
2 5
TBV Transaction Based Validator
October, 2016
DIP SWITCH TEST
The DIP Switch Test verifies the operation of the
DS1
or
DS3
8-position DIP
Switch. To perform this test, proceed as follows:
1. Click the
DIP Switch
a
).
2. Click the
“
Start
”
Screen Button to begin the test.
3. Change each Switch’s position from
OFF
to
ON
to verify the operation of the
DIP Switch.
The Status indicator for each Switch will change from
OFF
to
ON
when the
Switch position is changed.
4. Click the
“
Stop
”
Screen Button to end the test.
a
Figure 14
TBV Performance Tool - DIP Switch Tab
