© 2016 JCM American Corporation
1 1
October, 2016
TBV Transaction Based Validator
FIRMWARE DOWNLOAD PROCEDURE
To download Firmware to the TBV Unit, proceed as follows:
1. Click on the
Service Mode
drop down menu, then select
Download
.
The
JCM Downloader Suite Edition
screen will appear (Figure 5).
2. Click the
“
Browse
”
Screen Button and select the file to be downloaded.
Then click the
Open
Screen button that appears.
3.
The
JCM Downloader Suite Edition
screen will reappear (Figure 5). Click the
“
Download
”
Screen Button to begin downloading the Firmware.
4. Verify the
Host CRC
(Cyclic Redundancy Check) (Figure 5
a
) and the
Device
CRC
b
) Checksum values are identical.
5. Disconnect the USB Type A-to-Mini B cable from the PC’s USB Port and the
TBV Unit.
6. Reset electrical power on the TBV Unit.
This completes the Firmware Download Procedure.
NOTE: A
BLUE
-colored Barograph will display the Download progression.
When downloading is complete, the following message is displayed (Figure 5):
Download Success. Reset Done. Waiting for USB Cable Disconnection.
a
b
Figure 5
JCM Downloader Suite Edition Main Screen
NOTE: If the TBV Software becomes corrupted or has not been installed (e.g.,
when changing the CPU Board), set Forced Download Mode by turning DS1 or
DS3 DIP Switches #1, #6, #7 and #8 to ON. Then follow the Firmware Download
Procedure described above.
