177
16.4
VISUALIZATION of the DATA of INTERNAL PLU and PB
It's possible to visualize on display the programming data of internal PLU and PB
(programmed on the ECR's memory) and the bar-codes read with the scanner ; this function
can be activated in the Sup mode.
In order to activate the function of control of internal PLU and PB to execute :
(0)
directly from the Reg. mode, it will be obviously necessary that there aren't open receipts
(the function Sup does not have secrets codes for the activation).
VERIFICATION OF INTERNAL PLU DATA:
After to have executed the above described operation to continue as following :
-- OPERATION --
-- DISPLAY --
1) (NNN..N) PLU NNN..N= PLU code 4901201202155
Note :
The sequence (NNN... N) PLU can be replaced from the reading through
scanner of the product's bar-code or from the pressing of direct PLU key
2) PLU PLU description COKE
3) PLU Department description DRINKS
4) PLU PLU price 850
Note: if the PLU doesn't exist on memory, the point 2 execution will cause an ERROR.
VERIFICATION OF INTERNAL PB DATA:
PLU code with CHECK DIGIT
After to have executed the above described operation to continue as following :
-- OPERATION --
-- DISPLAY --
1) (NNN..N) PB NNN..N= PB code
1234454
Note :
The sequence (NNN... N) PB can be replaced from the reading by the scanner
of the customer's bar-code
2) PB
PB description (name)
MARIO ROSSI
3) PB PB personal discount
15
4) PB PB MAC
1.850.000
Note :
if the PB doesn't exist on memory, the point 2 execution will cause an ERROR.
