UM_3201027_BIO100_EN_Rev00
19/20
9 Safety instructions
Do not install the device in a place subject to direct sun light without protective
cover.
Do not install the device and cabling closeto a source of
strongelectro-magnetic fieldslike radio-transmitting antenna. Do
not placethe device near or above heating equipments.
lf cleaning,do not spray or splash water or other cleaning liquids but wipe it out
with smooth cloth or towel.
Do not let children touch the device without supervision.
Note that if the sensor is cleaned by detergent,benzene or thinner,the
surface will be da maged and the fingerprint can't be entered.
10 Regulatory data
Use of the system
This equipment is designed for applications with automated garage door. It is not
guaranteed for the direct activation of devices other than those specified.
The manufacturer reserves the right to change the equipment specifications without
prior notice.
11 UE Declaration of conformity
JCM Technologies S.A., hereby declares that the product BIO100 complies with the
relevant fundamental requirements of the Directives 2014/30/EU on electromagnetic
compatibility and with the 2011/65/EU RoHS Directive, as long as its use is foreseen.
See web page www.jcm-tech.com/es/declaraciones
JCM TECHNOLOGIES, SA
BISBE MORGADES, 46 BAIXOS
08500 VIC (BARCELONA)
ESPAÑA