© 2013, JCM American, Corporation
1 1
July, 2013
Lecture Notes
FUNCTIONAL TESTING
DIP S
WITCH
T
EST
Perform the following steps to test the functionality of each DIP Switch Block:
1. Ensure that the VEGA's Power is
OFF
.
2. Set all DIP Switches on DS 1 and DS 2 to the
ON
position.
3. Apply Power to the VEGA.
4. Set DS 1, Switch #1 to
OFF
. The Front Panel LED will go out (Extinguish).
5. Set DS 1 Switches #3, #5, & #7 and DS 2 Switches #1, #3, #5, & #7 to
OFF
.
The Front Panel LED will blink at a
Yellow
Color Rate.
6. Set DS1 and DS2 Switches #2, #4, #6, & #8 to
OFF
. The Front Panel LED will
blink at a
Blue
Color Rate if all the DIP Switches function properly.
F
EED
M
OTOR
F
ORWARD
R
OTATION
T
EST
Perform the following steps to test the normal forward rotation functionality of
the Feed Motor:
1. Ensure the VEGA's Power is
OFF
.
2. Set DS1, Switch #1
ON
.
3. Apply Power to the VEGA.
4. Set DS1, Switch #1
OFF
. This begins the Feed Motor Forward Rotation Test.
5. If the Feed Motor correctly rotates forward, the Front Panel LED will remain
extinguished (Out) and forward rotation will continue.
6. To end the Test, Set DS 1 Switch #1 to
ON
.
Table 5
Transport Motor Abnormal Error Codes
LED Color Blink Sequence
Error Indication
White
3
Feed Motor Low Speed Problem
5
Feed Motor High Speed Problem
7
Feed Motor Lock-up Problem
NOTE: If the Front Panel LED blinks any White sequence in Table 5, the Feed
Motor Forward Rotation is abnormal.
