© 2013, JCM American, Corporation
5
July, 2013
Lecture Notes
USER PRECAUTIONS
The following User precautions should be observed when installing, operating
and servicing a VEGA Unit:
•
When closing the Upper portion of the Transport path or the Course Path Reversing
Guide Cover, ensure that it clicks firmly into place
•
Turn the VEGA's Power OFF when opening the Upper Section of the Lower
Guide; otherwise, the Rollers may begin operating and personal injury to fingers
may occur by having them pulled into the Unit
•
Be careful to avoid personal injury to your fingers when closing the Upper Guide
Section
•
Clean the VEGA Unit once a Month to keep its performance stable and avoid
degraded Banknote acceptance
•
Use a lint-free cloth or Cotton Swabs to carefully remove dirt on the Sensors, and
to remove any Paper powder dust adhering to the Rollers
•
Under no circumstances allow a cleaning cloth to be wet enough to allow excess
fluid to run into the device; internal Printed Circuit Boards may be damaged. Do
not use Alcohol, citrus based cleaners, solvents or scouring agents that can damage
the plastic surfaces of the device
•
Do not re-design or disassemble the VEGA Validator. Unauthorized use by inade-
quately trained personnel, or use outside the original Manufacturer's intent for
operation voids the warranty
•
Do not inject water or liquid agents of any kind into the Validator; as this may cause
extreme damage to the Unit.
