![background image](http://html1.mh-extra.com/html/jcb/jcb-ss360/jcb-ss360_safety-and-operating-manual_3568487014.webp)
JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
B) EMPTY THE CYCLONIC DUST
BOX (See F1 F2)
For more efficient operation,
empty the cyclonic dust box every
5-10mins. This will permit the air to
flow through the box better.
To empty the box, press the latching
lever in and pull off the box. Then
press the button at the rear of the
box to open it, and shake out dust.
6. FLUSH SANDING
FACILITY
Your sander can sand flush on three
sides of the baseplate which allows
easy access to corners and edges
of mouldings (See G).
7. ORBITAL SANDING
Your sander operates in small
circular rotations which allow
efficient material removal. Operate
your sander in long sweeping
movements across your workpiece
and even across the grain. For a
finer finish, always use a fine grain
sanding paper and only move the
sander in the direction of the grit
and never across the grain. Do
not allow your sander to remain in
the same position otherwise you
will remove material and create an
uneven surface.
A2
11
A1
11
C
B
1
2
3
D
F1
F2
G
E