jcb 8026 CTS, Operator'S Manual

Page: 125 / 332

Operation
Starting the Engine
107 107
9811/9950-1
T023290-2
Fig 50.
To Arm the Immobiliser
1 Stop the engine and remove the starter key.
The immobiliser arms automatically after 2 minutes.
The red LED
A flashes for 60 seconds then goes
OFF.
Note: If you restart start the engine within 2 minutes, the
system disarms automatically.
To Add a New or Additional PIN Code
The Keypad Immobiliser System can be programmed to
accept a maximum of 14 different four-digit PIN codes.
1 Turn the starter switch to position I.
2 Push the MD button.
3 Enter the six-digit master code then push the ENT
button. The LED A will flash 3 times.
4 Within 59 seconds, push the MD button.
5 Enter the new or additional PIN code.
6 Push the ENT button. The LED A will flash 4 times.
HE Services