7
DRY vACUUm CleAnInG
Pleated filter
‰
For dry vacuuming, when picking up large
particles, the pleated filter may be used by
itself, no dust bag is needed. After use, the filter
may be gently brushed or tapped to remove
dust. The pleated filter
‰
cannot be washed
and should not be used for wet pick-up.
The product is supplied with the pleated filter
‰
fitted. To remove, eg. when using for wet
pick-up, pull gently
H
.
Paper dust bag
„
When picking up fine dust, we recommend the
paper bag should be fitted in addition to the
pleated filter. This stops the filter clogging and
makes disposal of the dust easier. Do not use
the paper bag for wet pick up.
Fitting the paper dust bag
Slide the paper dust bag
„
over the hose inlet
connection in the tank
I
.
Press it until it locates firmly into place all
around the connector
J
.
NOTE:
Opening the bag out a little
and bending the creases on the
cardboard will ease the fitting. Take
care not to damage the dust bag.
Check the dust bag
„
regularly and change it
when it is 2/3 full. If fine dust has been picked
up, the bag may need to be changed sooner as
the pores of the bag may become blocked. The
dust bag is not reuseable.
NOTE:
Don’t use the dust bag for
vacuuming up objects with sharp
edges or wet objects.
Place the motor housing on the tank
D
and
close the clamps
E
.
Screw the large end of the hose on the front air
intake stub
Í
on the tank
F
.
Make sure that the ON/OFF switch
Ê
on the
appliance is in the “Off” position (position “0”)
before you plug the power plug into the socket.
Plug the power plug into the socket.
Switch the motor on (ON/OFF switch in
position “I”).
When you have finished vacuuming, switch the
motor off by putting the ON/OFF switch
Ê
into the “OFF” position (position “O”).
Unplug the power plug.
H
I
J
