6
AssemBlY
1.
Make sure that the appliance is not
plugged in.
2.
Hold the two clamps, which hold the
motor housing in its position and fold
them upwards
A
.
3.
Loosen the clamps and lift the motor
housing up and out
B
.
4.
Turn the tank over so that the motor
housing is on the bottom.
5.
Put the four castors
Á
into the holes on
the bottom of the tank
C
.
16
1
2
3
4
6
7
8
9
10
11
12
13
14
15
17
19
5
18
6.
Firmly push the castors down until they
lock into position, then turn the tank over.
NOTE:
Take care not to damage
the tank by applying excess force.
7.
Fit the appropriate filter or bag. See later
sections.
8.
Replace the motor housing on the tank
D
.
9.
Hook the clamps into the motor housing
and let them snap into place by pressing
the clamps downwards
E
.
10. Screw the large end of the hose
›
on the
front air intake stub
Í
on the tank
F
.
11. Place the hose handle
Ï
on the hose
›
by pushing it into place.
12. Select a nozzle
fi ‡ · Î
or the
two metal tubes
fl
and slide it over the
suction tube
›
G
.
16
1
2
3
4
6
7
8
9
10
11
12
13
14
15
17
19
5
18
B
A
C
D
E
F
G