9
Two metal tubes with parking hook
fl
The two metal tubes simply push together.
The lower tube has a parking hook so that the
hose/tube assembly can be parked during use.
The parking hook slots into the U clip on the
motor housing. The parking hook position on
the tube is designed to suit the 2-position floor
nozzle, however the position of the parking
hook may be adjusted to suit the other nozzles
if required.
Loosen the two screws and slide to new
position and then re-tighten the screws.
sToRAGe
The tools and accessories may be stored on the
storage section at the rear of the product
L
.
16
1
2
3
4
6
7
8
9
10
11
12
13
14
15
17
19
5
18
To store the 2-position wheeled floor nozzle,
attach to the lower tube and then place in the
parking position.
mAInTenAnCe
Remove the mains plug before carrying out any
maintenance.
After using for wet pick-up, empty the
container, wash the foam mesh filter
‚
(in
clean cool water) and leave the container open
to fully dry before re-assembling.
With the filter removed, regularly check the
operation of the float. This must be able to
move freely to shut-off the suction when the
maximum quantity of water is picked up
M
.
16
1
2
3
4
6
7
8
9
10
11
12
13
14
15
17
19
5
18
L
M