12
21-RH1500
Instruction & User Manual
Mode Selector (4)
Drilling Mode
Use the correct specification of drill bit for
the material and power tool you are working
with. Incorrect selection may cause damage
to the tool, workpiece or bit.
WARNING!
Check that the drill is correctly inserted into
the chuck before starting the tool.
NOTE
m
If loose, clamp the work piece. The work
piece should lie flat on a workbench, and/or
be securely fixed.
m
Mark out the position of the hole by suitable
means.
m
Use a suitable drill for your material.
m
Ensure all drills are sharp.
m
When drilling in metal, make sure that the
drill is always sufficiently cooled with a non-
flammable liquid.
m
Start drilling at low speed.
m
If you are drilling large holes, pre drill with a
small drill and then finish off with a large drill.
m
Do not force the tool - do not press too
hard on the drill.
Hammer Drilling Mode
m
Set the mode selector switch to this mode
to enable the hammer function alongside
drilling. The hammer drilling function allows
more effective drilling into hard, brittle
materials such as concrete, brick and stone.
Percussion Chiselling Mode
m
Set the mode selector switch to this mode
to enable the percussive hammer function
without rotating the tool. The percussion
chiselling function allows fast removal of
hard, brittle materials such as concrete, brick
and stone.
Chisel Adjustment Mode
m
Chisel adjustment mode unlocks the chuck,
allowing the user to rotate the attached tool
to the required position.
2854 21-RH1500 Rotary Hammer Manual.indd 12
2854 21-RH1500 Rotary Hammer Manual.indd 12
08/07/2021 15:01
08/07/2021 15:01
