11
21-RH1500
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
This rotary hammer drill is intended for drilling
in stone, wood, metal, ceramics and plastics,
percussion drilling in brickwork, concrete and
stone and percussive chiselling in masonry and
plaster.
The tool must not be modified or used for
any other purposes than the ones described in
these instructions.
Attaching the Side Handle
m
Push the side handle over the drill chuck and
screw into place.
m
The side handle can be fitted to suit both
right-handed and left-handed users.
Replacing Bits
Tool accessories can be very sharp and can
become very hot during use - risk of
personal injury.
WARNING!
The device is equipped with a SDS- plus
attachment system.
NOTE
m
Place the tool on a stable surface, for
example a work bench.
m
Clean tools and grease with a thin layer of
machine grease before fitting.
m
Pull back fastening sleeve and hold.
m
Push and rotate the dust-free tool into the
tool holder as far as it will go. The tool will
lock automatically.
m
Check that the tool accessory is properly
positioned & locked into the tool holder.
Check that the accessory is straight, centred
and not askew. If the accessory is not
properly positioned it could fly out when
starting the tool.
NOTE
On/Off Trigger (7)
m
Press the on/off trigger to start the tool.
The tool has variable speed, and a lock button
for constant use.
Variable Speed Switch (2)
m
Press the on/off trigger to increase the
speed.
m
Adjust the variable speed switch to the
appropriate speed.
m
Release the on/off trigger to stop the tool.
2854 21-RH1500 Rotary Hammer Manual.indd 11
2854 21-RH1500 Rotary Hammer Manual.indd 11
08/07/2021 15:01
08/07/2021 15:01