10
21-AG125
Instruction & User Manual
Safety Warnings Specific for
Sanding Operations
m
Do not use excessively oversized
sanding disc paper. Follow
manufacturers recommendations,
when selecting sanding paper.
Larger
sanding paper extending beyond the sanding
pad presents a laceration hazard and
may cause snagging, tearing of the disc or
kickback.
Safety Warnings Specific for
Polishing Operations
m
Do not allow any loose portion of the
polishing bonnet or its attachment
strings to spin freely. Tuck away or
trim any loose attachment strings.
Loose and spinning attachment strings
can entangle your fingers or snag on the
workpiece.
Safety Warnings Specific for Wire
Brushing Operations
m
Be aware that wire bristles are
thrown by the brush even during
ordinary operation. Do not overstress
the wires by applying excessive load
to the brush.
The wire bristles can easily
penetrate light clothing and/or skin.
m
If the use of a guard is recommended
for wire brushing, do not allow any
interference of the wire wheel or
brush with the guard.
Wire wheel or
brush may expand in diameter due to work
load and centrifugal forces.
The electric motor has been designed
for operation on a 220-240V AC 50/60
Hz power supply. 220-240V AC means
your tool will operate on alternating
current at a voltage range from 220-
240V. As little as 10% lower operating
voltage (or incorrect mains HZ fre-
quency) can cause loss of power and
overheating. All JCB tools are factory
tested. If this tool does not operate
check the power supply. Make sure your
power supply agrees with the voltage
specified on the product rating label.
m
Replacement of the supply cord. If the
supply cord is damaged, it must be replaced
by the manufacturer or an authorised JCB
Service Centre in order to avoid a hazard.
We recommend the use of a
residual current device (R.C.D.)
with a residual current rating of
30mA or less.
ELECTRICAL SAFETY
This electric tool generates an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants consult their physician
and the medical implant manufacture
prior to operating this power tool.
WARNING!