6
21-AG125
Instruction & User Manual
TOOL SPECIFIC SAFETY WARNINGS
m
Wear ear protectors.
Exposure to noise
can cause hearing loss.
m
Wear eye protection.
Wear goggles
to prevent eyes from exposure to flying
particles.
m
Wear dust mask.
Take protective
measures against inhalation of dust. Some
materials can contain toxic materials. Also
work with dust/ chip extraction when
connectable.
Safety Warnings Common
for Grinding, Sanding, Wire
Brushing, Polishing or Abrasive
Cutting-Off Operations
m
This power tool is intended to
function as a grinder, sander, wire
brush, polisher or cut-off tool. Read
all safety warnings, instructions,
illustrations and specifications
provided with this power tool.
Failure
to follow all instructions listed below may
result in electric shock, fire and/or serious
injury.
m
Operations such as grinding, sanding,
wire brushing, polishing or cutting-
off are not recommended to be
performed with this power tool.
Operations for which the power tool was
not designed may create a hazard and cause
personal injury.
m
Do not use accessories which
are not specifically designed
and recommended by the tool
manufacturer.
Just because the accessory
can be attached to your power tool, it does
not assure safe operation.
m
The rated speed of the accessory
must be at least equal to the
maximum speed marked on the
power tool.
Accessories running faster
than their rated speed can break and fly
apart.
m
The outside diameter and the
thickness of your accessory must be
within the capacity rating of your
power tool.
Incorrectly sized accessories
cannot be adequately guarded or controlled.
m
Threaded mounting of accessories
must match the grinder spindle
thread. For accessories mounted
by flanges, the arbour hole of the
accessory must fit the locating
diameter of the flange.
Accessories that
do not match the mounting hardware of the
power tool will run out of balance, vibrate
excessively and may cause loss of control.
List only those operations that were not
included in the first warning. If all listed oper-
ations are recommended, then this warning
may be omitted, but all subsequent warnings
are to be given without exclusion.
NOTE