ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
13/15
USB 1.1 REC
motor drive and laser. During sleep mode the display shows the word [SLEEP]. To wake up the player,
just press the cue or play button, the display turns to normal and is ready to receive instructions.
•
TOTAL RANDOM ON A USB-drive:
This is the simple random function where any track on your USB-drive can be played randomly:
•
Open the fader for the USB1.1 REC on your audio mixer.
•
Press the [SOURCE SELECT]-button (25) to choose one of the USB-drives.
•
Press the [RANDOM]-button (23) shortly until the word [RANDOM] in the display is lit.
•
Press the [PLAY]-button (14) to start random playback.
•
“SMART” RANDOM ON A USB-drive:
This is the “smart” random function where you have full control over which folder, genre, album or artist
you want to play in your random selection, perfect for background music in restaurants, shops, clubs &
bars without a dj. This is how it works:
•
Open the fader for the [USB1.1 REC] on your audio mixer.
•
Press the [SOURCE SELECT]-button (25) to choose one of the USB-drives.
PLAY ONLY TRACKS FROM 1 FOLDER
•
Press & turn the [TRACK]-knob (16) to select the [Std] search-key.
•
Press the [FOLDER] button (15), the display will show the currently selected directory name.
•
Turn the [TRACK] knob (16) to select the directory you want to play files from.
•
Press the [RANDOM]-button (23) for about 2 seconds until [RANDOM] starts blinking in the display.
•
Press the [PLAY]-button (14) to start random playback only from the selected folder.
PLAY ONLY TRACKS FROM 1 GENRE
•
Press & turn the [TRACK]-knob (16) to select the [Genre] search-key.
•
Press the [FOLDER] button (15), the display will show the currently selected genre.
•
Turn the [TRACK] knob (16) to select the first letter of the genre you want to choose.
•
Press the [RANDOM]-button (23) for about 2 seconds until [RANDOM] starts blinking in the display.
•
Press the [PLAY]-button (14) to start random playback only from the tracks of the selected genre.
Remark1: to play only tracks from a certain artist or album, just repeat the actions but select the artist
or album search-key.
Remark2: please note that the [SMART] random function will only work properly on condition that your
ID3-tags are well maintained. A perfect “freeware” ID3-tag editor for this task is called “MP3TAG” and
can be downloaded from www.mp3tag.de !
•
PITCH BENDING:
This function is used to synchronize the beats of two tracks. This can be done in two ways:
•
[PITCH BEND] buttons:
The speed increases or decreases respectively as long as the [PITCH
BEND+] or [PITCH BEND-] buttons (22) are pressed.
•
[JOG WHEEL]:
During play mode the [JOG WHEEL] (28) will temporarily bend the pitch of the music
by turning the [JOG WHEEL] clockwise to speed up or counterclockwise to slowdown. The rotation
speed the [JOG WHEEL] determines the percent of pitch bend.
•
PLAYING/RECORDING CD-R and CD-RW:
Apart from normal audio CD’s the [USB1.1 REC] can play both CD-R (CD recordable) and CD-RW (CD
rewriteable). Please note that you should always use the “disc at once” and “track at once” disc writing
options! Although the [USB1.1 REC] is capable of reading CD-R and CD-RW recorded at higher speeds,
we suggest not using recording speeds more than x12 to increase readability. Always buy good quality
brands for CD-R and CD-RW!
If the disc is multi session, it will only play the first session:
•
if the first session is CD-DA you can only play CD-DA tracks.
•
if the first session is MP3 you can only play MP3 files.
ABOUT LOOPS:
•
CREATE A LOOP:
While a track is playing, press the [CUE] button (11) to program the start point of the loop. Now press the
[OUT] button (12) to program the endpoint of the loop. Then press the [PLAY]-button (14) to start the loop.