ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
10/15
USB 1.1 REC
Turn the [JOG WHEEL] (28) to select the desired value:
[Dis. = 0.5s
12.0s]:
waiting time in seconds.
[Run = 50ms
2000ms]:
50ms = fast speed / 2000ms = slow speed
o
[Mode = 3]:
text line scrolls continuously.
Turn the [JOG WHEEL] (28) to select the desired value:
[Dis. = 0.5s
12.0s]:
waiting time in seconds.
[Run = 50ms
2000ms]:
50ms = fast speed / 2000ms = slow speed
Press the [TRACK] knob (16) to save the new values and return to the main menu.
3. [SGL/CONT]:
You can choose between “single track mode” and “continuous play”.
•
Continuous: the complete CD/USB-drive will be played without interruption. (used in pubs)
•
Single: player stops at the end of each track and waits at the beginning of the next track. (mostly
used by deejays)
Turn the [TRACK] knob (16) to select the desired mode. Press the [TRACK] knob (16) to save the
new value and return to the main menu.
4. [AUTOCUE MODE]:
while switched on the player stops at the end of each track and waits at the first
music note of the next track. This means that badly indexed CDs will not interfere with the instant start
capabilities of the player, a very useful feature for deejays!
5. [REC. USB]:
you can select to which USB-slot (USB1 or USB2) the recording whould be sent.
6. [REC. Bitrate]:
you can choose the quality of your recording (WAV – MP3). Turn the [TRACK] knob (16)
to select the desired recording quality: WAV, MP3-quality : from 64 kbps (lowest quality) up to 320 kbps
(highest quality).
7. [REC. Input] :
you can choose [AUTO] or [MANUAL]. [AUTO] limits
the recording level automatically to
0dB.
8. [OUT Mode] :
you can choose [PLAYBACK] or [REC MON].
ATTENTION! : when you put the [USB 1.1
REC] in [REC. MON] mode the playback signal will be interrupted and you will hear the recording
signal on the output.
9. [Version / upgrading]:
use this option to check and/or upgrade the firmware versions.
Turn the [TRACK] knob (16) to select the 2 firmware parts:
o
[CON: xx]:
shows the version of the control firmware
o
[DSP: xx]:
shows the version of the DSP firmware
o
[Upgrade]:
blinks when the unit is ready to check if there are new firmware versions
available. See “FIRMWARE UPGRADING” for more information.
Press the [TRACK] knob (16) to return to the main menu.
A. [Load defaults]:
If you really messed up things, you can still reload the default setting!
While [Load Defaults] is shown on the display: press the [TRACK] knob (16) to load the defaults.
B. [Exit & Save]:
if you want your changes to the setup menu to be permanently saved (also after switching
the unit off) you MUST use this option!
Press the [TRACK] knob (16) : the display shows [Saving] and exits the setup menu.
FIRMWARE UPGRADING
We strongly suggest to regularly check the [USB1.1 REC] product page on
www.jbsystems.be
to see if new
firmware updates are available. Upgrading firmware should always be done very carefully!
•
Download the file containing the upgrade file(s)
•
Read the instructions and follow them strictly, otherwise you could damage your equipment…
•
Put the files on an EMPTY
(important!)
USB-stick.
•
Press the [TIME] button (26) for about 3seconds to enter the setup menu.
•
Use the [TRACK] knob (16) to browse to menu option [
9. Version
].
•
Turn the [TRACK] knob (16) until the display shows [Upgrade].
•
Use the [SOURCE SELECT] button (25) to select USB1 input (3).
•
Insert the USB-stick with firmware files in USB1-input (3)
Upgrading will start automatically:
WAIT (!)
until the upgrading process is finished.
NEVER
turn the
player off while upgrading the software!!!
•
If the display asks you to turn off the unit: turn the unit off, wait 3seconds and turn it back on.
•
Check if the software version corresponds to the version marked in the readme file that came with the
update.