65
OPERATING THE SCS135S
Move the Master Power switch (marked “Power”
) to the “
•
” (On) position to
use the subwoofer. The SCS135S subwoofer will automatically turn itself on or go
into Standby (sleep) mode. When your receiver or amplifier is off, or is not sending
program material to the subwoofer, the subwoofer will be in Standby mode, which
is indicated by the LED
turning red. When the subwoofer senses an audio signal,
it will automatically turn itself on, and the LED
will turn green. If the subwoofer
does not sense a signal after approximately twenty minutes, it will automatically go
into Standby mode, and the LED
will revert to red.
If you will be away from home for an extended period of time, or if the subwoofer
will not be used, switch the Master Power switch
to the Off position.
3
2
2
2
3
LFE
GREEN: ON
RED: STAND-BY
SUB135S
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
"WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE."
"AVERTISSEMENT: POUR PR VENIR LES RISQUES D’INCENDIE OU
DE CHOC LECTRIQUE, VITER D’EXPOSER CET APPAREIL A LA
PLUIE OU A L’HUMIDIT .
"
"WARNING:
FOR CONTINUED
PROTECTION AGAINST RISK
OR FIRE, REPLACE ONLY WITH
SAME TYPE 2.5A, 250 VOLT
"AVERTISSEMENT: UTILISEZ UN
FUSIBLE DE RECHANGE DE MEME
TYPE 2.5A, 250V"
NRTL/C
CSA 22-2 No.1
UL 1492
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
POWER
FUSE
2.5A/250V
TYPE T
AC 120V~60Hz
200 Watts
This area is designed to become quite warm
during normal operation
JBL, Incorporated
1
2
3
4
Summary of Contents for DVD600
Page 1: ......
