JBL DVD600 Owner'S Manual Download Page 25

Page: 25 / 73

This button is also used during the “Auto
Search” procedure when programming the
remote.

All Off:

Simultaneously sends Power Off

commands to all programmed devices con-
trolled by the remote.

All On:

Simultaneously sends Power

On commands to all programmed devices
controlled by the remote.

Volume Down:

Use to lower the system

volume.

Channel/Title/Guide:

Starts the process

of setting the DCR600’s speaker output levels
using an input source rather than the test tone.
Press this button, then use the

⁄

Buttons

to select the channel being adjusted,

followed by the

Set Button

. You may

then use the

⁄

Buttons

again to

change the level for that channel. Press the

Set Button

to lock in the setting.

When using the DVD600 to play a DVD disc,
this button functions as a Title button, and dis-
plays the disc’s Title Select Menu, or a symbol
(

) if the disc either does not offer this func-

tion or has only one title.

When the Video 3 input has been programmed
for a cable or satellite service, this button will
access the service’s programming guide, if the
service is active.

⁄

Used to change or scroll through items

in the on-screen menus, or to change configu-
ration settings, such as output levels. When
changing an item such as the surround mode
or digital input directly, first press the function
or mode to be changed, such as Surround
Mode or Digital Input, and then press this button
to scroll through the list of available choices.

Menu:

Used only with video sources.

When DVD is selected, pressing this button
while a DVD disc is playing stops playback and
displays the disc’s menu. When the unit is
stopped, pressing this button displays the
DVD600’s Setup Menu.

‹

Used to change the menu selection

or setting during some of the setup or other
procedures.

Set:

Used to enter settings into the mem-

ory of the DCR600, DVD600 or video device
selected. Also used in the setup procedures for
delay time, speaker configuration and channel
output level adjustment. When the DVD600

has been selected, pressing this button will
select the item that is highlighted in the Status
Banner, or in the on-screen menu displayed by
a DVD disc.

›

Used to change the menu selection

or setting during some of the setup or other
procedures.

Digital/Subtitle/Exit:

When the DCR600

is selected, press this button to assign one of
the digital inputs to a source. When the
DVD600 is selected, this button is used to
change the subtitle choice. For other video
devices, it exits the menu.

Used to change or scroll through

items in the on-screen menus, or to change
configuration settings, such as output levels.
When changing an item such as the surround
mode or digital input directly, first press the
function or mode to be changed, such as
Surround Mode or Digital Input, and then press
this button to scroll through the list of
available choices.

Delay/Return/Prev Ch.:

Begins the

process for setting the delay times used by the
DCR600 when processing surround sound.
After pressing this button, the delay times are
entered by pressing the

Set Button

and

then using the

⁄

Buttons

change the setting. Press the

Set Button

again to complete the process.

This button is also used when viewing a menu
display from a DVD disc. Press it to return to
the previous menu screen.

–

Numeric Keys:

These

buttons serve as a ten-button numeric keypad
to enter tuner preset positions. They are also
used with the DVD600 to enter data for
sequential programming, to enter or change
the access password for parental control, to
enter a language code, or to respond to menu
options presented by a disc. When the TV or
another video device is selected, they are used
to select channel numbers. They may also be
used to select track numbers when playing a
CD, DVD or LD.

Tuner Mode/Angle:

Press this button

when the tuner is in use to select between
automatic tuning and manual tuning. When
the button is pressed so that the

AUTO

indica-

tor

goes out, pressing the

Tuning Buttons

will move the frequency up or

down in single-step increments. When the
FM band is in use, pressing this button when
a station’s signal is weak will change to
monaural reception.

When a DVD encoded with multiple-angle
information is playing, press to change the
angle in use. Note that this function is only
available on discs that are specially prepared
to take advantage of the multiple-angle func-
tion, and only for those parts of the disc that
are recorded with multiple-angle content.
The DVD600 will display a camera icon on the
screen to indicate when this feature is
available.

Memory:

Enters a radio station into the

DCR600’s preset memory. Once the

MEMORY

Indicator

flashes, you have five seconds

to enter a preset memory location using the

Numeric Keys

–

. Repeat

the process to enter additional stations.

Tuning Up/Down/Step (Frame

Advance) Buttons:

When the tuner is in use,

these buttons will tune up or down through the
selected frequency band. If the

Tuner Mode

Button

has been pressed so that the

AUTO Indicator

is illuminated, pressing

and holding either of the buttons for three sec-
onds will cause the tuner to seek the next sta-
tion with acceptable signal strength for quality
reception. When the

AUTO Indicator

NOT illuminated, pressing these buttons will
tune stations in single-step increments.

When a DVD disc is playing, press these
buttons to move forward or backward one
frame at a time. Press the

Play Button

to resume normal play. These buttons do

not function when a CD is playing.

Direct/Program Button:

Pressing this

button in tuner mode starts the sequence for
direct entry of a station’s frequency or CD track.
After pressing the button, simply press the
proper

Numeric Keys

–

select a station or track.

When the DVD600 is stopped, press this but-
ton to display the program menu and enter a
programmed play sequence. When a disc is
playing, press to switch between normal play
and programmed playback.

Clear Button:

Erases incorrect entries

when using the remote to directly enter a radio
station’s frequency.

When the DVD600 has been selected, press
this button to remove the Status Banner or
other displays from your video screen. This
button is also used to clear items from
Programmed Play lists.

10D