JBL DVD600 Owner'S Manual Download Page 47

Page: 47 / 73

Remote Control Functions

(Continued)

Channel Control Punch-Through

The remote may be programmed to operate so
that the channel control function for either the
TV, cable or satellite receiver used in your system
may be used in conjunction with one of the other
devices controlled by the remote. For example,
while using and controlling the VCR, you may
wish to change channels on a cable box or satel-
lite receiver without having to change the device
selected by the DCR600 or the remote. To pro-
gram the remote for Channel Control Punch-
Through, follow these steps:

Press the

Input Selector Button

–

for the device with which you wish to have the
channel control associated and the

Mute

Button

at the same time until the red

light appears under the

Input Selector

–

and the

Program Indicator

flashes.

Press the

Volume Down Button

. The

Program Indicator

will stop flashing and

stay lit.

Press and release the

Input Selector Button

–

for the device that will be used to

change the channels. The

Program Indicator

will blink three times and then go out to con-
firm the data entry.

Example:

To control the channels using your

cable box or satellite receiver while the
remote is set to control the VCR, first press the

VID 1/VCR Input Selector Button

and

the

Mute Button

at the same time. Next,

release them and press the

Volume Down

Button

, followed by the

VID 3/

CATV/SAT Input Selector Button

NOTE:

To remove the Channel Control Punch-

Through and return the remote to its original con-
figuration, repeat the steps shown in the exam-
ple above. However, press the

VID 1/VCR Input

Selector

in Steps 1 and 3.

Transport Control Punch-Through

The remote may be programmed to operate so
that the

Transport Control

–

functions

(Play, Stop, Fast Forward, Rewind, Pause and
Record) for a VCR, DVD or CD will operate in con-
junction with one of the other devices controlled
by the remote. For example, while using and con-
trolling the TV, you may wish to start or stop your
VCR or DVD without having to change the device
selected by the DCR600 or the remote. To
program the remote for Transport Control Punch-
Through, follow these steps:

Press the

Input Selector

–

for the

device with which you wish to have the chan-
nel control associated and the

Mute Button

at the same time until the red light

appears under the

Input Selector

–

and the

Program Indicator

flashes.

Press the

Play Button

. The

Program

Indicator

will stop flashing and stay lit.

Press and release the

Input Selector Button

–

for the device that will be used to

change the channels. The

Program Indicator

will blink three times and then go out to con-
firm the data entry.

Example:

To control the transport of a DVD

player while the remote is set to control the
TV, first press the

VID 2/TV Input Selector

Button

and the

Mute Button

at the

same time. Next, release them and press the

Play Button

, followed by the

DVD

Input Selector Button

NOTE:

To remove the Channel Control Punch-

Through and return the remote to its original con-
figuration, repeat the steps shown in the exam-
ple above. However, press the

VID 2/TV Input

Selector

in Steps 1 and 3.

NOTE:

Before programming the remote for

Volume, Channel or Transport Punch-Through,
make certain that any programming needed to
assign the remote to control the specific TV, CD,
DVD, cable or satellite receivers has been
completed.

Reassigning Devices

Although each

Input Selector

–

normally assigned to the category of product
shown on the remote, it is possible to reassign
one of these buttons to operate a second device
of another type. For example, if you have two
VCRs but no satellite receiver, you may program
the “SAT” button to operate a second VCR.
Before following the normal programming steps
for either three-digit entry or Auto Search code
entry, you must first reassign the button with the
following steps:

Press the

Input Selector

–

you wish

to reassign and the

Mute Button

at the

same time until the red light appears under
the

Input Selector

–

and the

Program Indicator

flashes.

Press the

Input Selector

–

for the

device you wish to program into the
reassigned button.

Enter the three-digit code for the specific

model you wish the reassigned button to
operate.

Press the same

Input Selector

–

pressed in Step 1 once again to store the
selection. The red LED under the reassigned
Input Selector will flash three times and then
go out.

Example:

To use the CBL/SAT button to

operate a second VCR, first press the

CBL/SAT Input Selector

and the

Mute

Button

at the same time until the red

light glows under the

CBL/SAT

button.

Press the

VCR

button, followed by the

three-digit code for the specific model you
wish to control. Finally, press the

CBL/SAT

button again.

Resetting the Remote Memory

As you add components to your home-theater
system, occasionally you may wish to totally
reprogram the remote control without the confu-
sion of any commands, macros or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to
the original factory defaults and command codes
by following these steps. Note, however, that
once the remote is reset, all commands or codes
that you have entered will be erased and will
need to be reentered:

Press any of the

Input Selector Button

–

and the

”O“ Button

the same time until the

Program Indicator

begins to flash.

Press the

”3“ Button

three times.

The red LED under the