JB-Lighting Varyscan 6 HMI 575 User Manual Download Page 8

Page: 8 / 14

Varyscan 6 HMI 575

- 8 -

Pan/Tilt normal/changed

With this function you can change the pan-axis and the tilt-axis i.e. if you put in the function to changed, the projector
moves in tilt-direction if in your controller there is a pan-direction programmed and with a programmed tilt-direction it
moves to pan-direction.

08/16Bit DMX

With this function you can adapt your Varyscan

6 575 HMI to a 10-channel class of rating, that you can operate the

projector at a DMX-control system with 8bit-DMX for pan/tilt. For the selection of this function, change into the setup-
menu of the projector – range DMX-mode – and confirm with the key enter as long as the function 08/16 bit DMX
appears. Now you can change with the keys + and – between 10 and 12 channels (8/16 bit).

Test mode:

To see the variety of the functions of your Varyscan

6 575 HMI, adjust the Varyscan

in the test mode by pressing the

key menu and after it enter (change into the DMX-mode) as long as the option test mode appears on the display. Now
you can change with the key + to test mode on. For the confirmation you have to press one after the keys enter and
menu. The projector performs a reset and pass subsequently the test mode.

Stand-alone-Mode

Change into the standalone-mode as described above. There you have the following points of menu at your disposal.

Number of steps

With the keys + and – you can enter the number of steps that you want to program. Confirm it with the key enter and you
will come directly to the next point of menu.

Edit step

With the keys + and – you can select, which step of your program you want to program. By confirmation with the key enter
you will come to the selection of the times for the selected step and to the single functions (pan, tilt, gobo, colour, ...) of
the projector. Following you can select the different features of the projector and the different times with the keys + and -.
In the display you see the selected program-step and your selected features or one of the both times (step 01: gobo

step 01 and selected feature gobo). For a change of your selection confirm your selected feature with the key enter and
change the value with the keys + and -. The values of the separate features correspond to the DMX-values of the
separate channels. At the both times there are adjustments between 0 and 255 seconds possible. For the confirmation of
you value change leave the level with the key enter. Automatically you will come to the next feature which you can
change with the key enter and afterwa rds with + and -. The features are saved in the menu in the following order (see
table and page 10).

Menu point of the projector

Description of the features

TIME

Adjustment of the program hours of operation

MOVE

Adjustment of the moving times

PAN

Adjustment of the position of the projector (x-axis)

TILT

Adjustment of the position of the projector (y-axis)

GOBO

Selection of the gobos of the projector