Jazzy Elite ES, User Manual

Page: 43 / 64

Jazzy Series 43
V. C O M F O R T A D J U S T M E N T S
MANUAL RECLINE SEATBACK
ADJUSTMENT
If your power chair is equipped with a manual
recline seatback, you can adjust the seatback
angle with the seatback release lever. The lever
is located on the right side of the seat base.
See
figure 10.
To adjust the recline angle:
1. Pull up on the seatback release lever.
2. Lean forward or rearward to the desired
position.
3. Release the lever.
Armrest Width Adjustment
You can change each armrest’s width
independently of the other.
NOTE: Changing the armrest width may
increase the overall width of your power chair.
To change the armrest width:
1. Locate the armrest width adjustment knob
on each side of the armrest receiver bracket.
See figure 10.
2. Loosen the knob.
3. Slide the armrests in or out to the desired
width.
4. Tighten the knob.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is
perpendicular to the floor.
2. Loosen the locking nut.
3. Turn the adjustment screw to raise or lower
the front of the armrest.
4. Tighten the locking nut to lock the adjustment
screw into place.
Armrest Height Adjustment
To change the armrest height:
1. Loosen the setscrew on the armrest. See
figure 10.
2. Raise or lower the armrest to the desired
height.
3. Tighten the setscrew to secure the armrest.
Figure 10. Armrest and Seatback Adjustments
ARMREST WIDTH
ADJUSTMENT SETSCREW
ARMREST
HEIGHT
ADJUSTMENT
SETSCREW
SEATBACK
RELEASE
LEVER
ARMREST
ANGLE
ADJUSTMENT
SCREW
LOCKING
NUT